2003 D
Duke S
SL A
Air &
& U
U-T
Turn S
Service G
Guide
R
EV
. A
7
33. Slide the Pure DeLite damper tube assembly from the bottom of the upper tube (fig. 33).
34. Invert the damper and gently but firmly pull the rebound damper seal head from the
Pure tube (The seal head is pressed firmly into the Pure tube and sealed with an o-
ring). You may want to hold a rag around the end of the Pure tube and the seal head
to catch any oil that spills. Turn the Pure tube over and drain the oil into the oil pan
(see fig. 34).
35. To remove the internal floating piston (IFP) hold the Pure tube over a lint-free rag
with one end up . The IFP is located inside the Pure damper tube in the center of
the tube. The IFP is the seal that separates the oil from the air in the Delite air
chamber.
37. Using a long plastic rod, insert the rod into the Pure tube until the rod touches the
underside of the IFP. Make sure the rod engages only the pocketed side of the IFP.
This ensures that you do not damage the inside of the Pure tube with the rod. Press
firmly on the rod only when it is engaged safely into the IFP (fig. 36a). Push firmly
down to release the IFP from the Pure tube (fig. 36b). The IFP will appear at the
end of the tube and on the rag below. (See Fig 36c). Pull the rod out gently without
scratching the inside of the Pure tube.
37. Using isopropyl alcohol clean the inside of the Pure tube with a lint-free rag wrapped
around the rod. Allow to dry.
38. Inspect the IFP o-ring seal for wear and replace as necessary (fig. 39) (110-007425-00
Pure DeLite Internal Floating Piston, or 110-006245-00 Pure Damper Service Kit).
33
34
36c
R
E M O VA L O F T H E
I
N T E R N A L
F
LO AT I N G
P
I S T O N
(IFP)
36a
36b
38
