alternating current / prąd
przemienny / Wechsel-
strom
direct current / prąd stały /
Gleichstrom
EN 61010-1 / CAT: II / RoHS / 600V /
The meter meets safety standards in accordance with international and European
standards / Miernik spełnia normy bezpieczeństwa zgodne z międzynarodowymi
i europejskimi standardami / Das Messgerät erfüllt Sicherheitsstandards gemäß
internationalen und europäischen Standards
Dangerous voltage
Niebezpieczne
napięcie
Gefährliche Spannung
Electrical grounding
Uziemienie
elektryczne
Elektrische Erdung
Double insulation
Podwójna izolacja
Doppelisolierung
Attention,
read the manual
Uwaga, przeczytaj
instrukcję
Achtung, lesen Sie
die Anleitung
Uncharged battery
Rozładowana bateria
Ungeladener Akku
EN
INTRODUCTION
This instrument is a digital multimeter with a large 3 1/2 digit wide LCD display and
manual selection of the measuring ranges. The multimeter is used to measure basic
current quantities. The instrument has stable performance, high precision, high
reliability and overload protection function. It is powered by 1.5V 2xAAA batteries.
It is small and easy to carry, has an LCD backlight and an additional, built-in flashlight
to illuminate the measurement site. The multimeter accurately measures the following
current values: AC / DC voltage, DC current, resistance, diodes, circuit test, neutral wire
detection, non-contact voltage detection, and AC actual value.
SAFETY INFORMATION
READ AND UNDERSTAND ALL INSTRUCTIONS REGARDING THE USE AND CARE
OF TOOLS. FAILURE TO OBSERVE THEM COULD RESULT IN DAMAGE TO THE
BODY OR PROPERTY, OR THE LOSS OF THE WARRANTY. IMMEDIATELY AFTER
PURCHASE CHECK THAT THE PRODUCT IS COMPLETE AND UNDAMAGED. REPORT
ANY IRREGULARITIES TO DEALER. The multimeter is made in accordance with the
international safety standard ICE 61010-1.
• it is a device that can measure direct and alternating current (AC / DC) up to 600 V
• when measuring DC voltage above 36V DC and AC voltage above 25V AC, thetester
must have proper contact with the place of measurement, it is properly connected
to the appropriate port in the device and is properly insulated, otherwise there is a
risk of electric shock.
