3
PRODUCT SPECIFIC SAFETY WARNINGS
>
To avoid serious injury, keep hands and fingers away from spinning router bit. Maintain
awareness of the bit at all times.
>
The Insert Ring
MUST
be perfectly flush with the SL Router
Lift plate. If it is not, the workpiece could catch and
dangerous kickback could occur.
>
The SL Router Lift is sized for routers with a
3
1
⁄
2
" diameter motor.
>
To avoid serious injury and damage to your router
and the SL Router Lift, the router motor
MUST
be
securely mounted in the Router Lift’s housing.
>
Refer to your router’s owner’s manual for specific safe
operating instructions.
>
Unplug your router motor before installing or removing it
or adjusting the SL Router Lift router housing.
>
To avoid serious injury, never attempt to cut a workpiece
without an Insert Ring installed.
>
If attempting to rout a workpiece without using the router
table fence, always use the included Starter Pin to begin
the cut. Failure to do so could result in dangerous
workpiece kickback and serious injury.
>
Use the Starter Pin
ONLY
with bearing-guided router bits.
Use with other bits could result in serious injury.
>
Do
NOT
use a cordless drill to raise and lower the lift carriage. The resulting friction will cause premature wear to the threads.
