4
Distributed by Rockler Companies, Inc.
©2016 Rockler Woodworking and Hardware
23194
Rev 05/16
Important Safety Instructions
1. This tool is designed for specific applications as defined in
the instructions and should not be modified and/or used for
any other applications.
2. Before using the Rockler Dust Right Lathe Dust Collection
System read, understand and follow all instructions and
safety information provided.
3. For any tool that is used in conjunction with this product
always read, understand and follow the instructions and
safety warnings for that tool
4. Before using this product, review and verify that all tools
used with it are in proper working order as defined by the
tool’s owner’s manual.
5. All safety equipment must be installed and working
properly as defined by the tool’s owner’s manual.
6. Do not use this product until you have read the provided
instructions and warnings and are confident you
understand them.
7. Always wear safety glasses in compliance with ANSI safety
standards and hearing protection and follow all standard
shop safety practices including:
A. Keep your work area well lit and clean.
B. Use dust collection tools and dust face masks to reduce
exposure to dust.
C. Keep children and bystanders away while operating
your tools.
D. Maintain proper footing at all times and do
not overreach.
E. Do not force the tool.
F. Unplug all power tools before making any adjustments
or changing accessories.
8. Remain alert and use good judgment when using this tool.
Do not use this tool if you are in any way impaired by
medications, alcohol, drugs or fatigue.
9. Dress appropriately and remove all jewelry, secure loose
clothing and tie up long hair before using this tool.
10. It is the sole responsibility of the purchaser of this tool to
ensure that any third party reads and agrees to all the
safety precautions outlined in this manual prior to
using the tool.
11. Maintain these instructions and warnings as long as
you own the tool. Keep in a place where they will be
readily available for reference.
12. The user assumes all risk for the proper use of this tool
and for ensuring product suitability for intended application.
13. These warnings and instructions do not represent the total
of all information available regarding tool safety, use and
technique. Always seek out opportunities to learn more
and improve your skills and knowledge.
14. Before turning on the lathe, verify that all of the Lathe Dust
Collection System components are installed properly and
are securely tightened.
15. With the lathe off, hand-spin your workpiece to ensure that
it will not come into contact with any part of the Lathe Dust
Collection System.
16. While sanding, the lathe tool rest must be removed.
17. While sanding, keep the Dust Scoop in the sanding
position (Dust Scoop is tilted vertically – i.e., not
surrounding the workpiece but behind it) to prevent
finger entrapment.
18. Always use sharp tools and practice proper
woodturning technique.
19. Use the appropriate lathe speed for the work being done,
as defined by your lathe manufacturer.
20. Be aware that, with your dust collection unit on, sand
paper or rags may be drawn toward the Dust Scoop.
Maintain awareness and use a secure grip.
003
