3
PRODUCT SPECIFIC SAFETY WARNINGS
>
To avoid serious injury, keep hands and fingers away from the spinning router bit. Maintain
awareness of the bit at all times.
>
Turn off and unplug your router before installing the bit or
adjusting the cutter height.
>
To avoid serious injury and damage to your router and the
Indexing Dado Jig, the router
MUST
be securely attached
to the Router Plate (1), and the Router Plate must be
secured to the Jig Base (2).
> ALWAYS
remove the router bit from the router
BEFORE
mounting the router to the Router Plate (1).
> BEFORE
beginning any routing operation,
ALWAYS
make sure that
ALL
knobs on the Indexing Dado Jig
have been tightened.
>
Refer to your router’s owner’s manual for specific
safe operating instructions.
>
The Indexing Dado Jig works with 1/8"-diameter router bits and 1/4"- through 3/4"-diameter router bits. It does
NOT
work
with bits between 1/8" and 1/4" in diameter.
