4
Assemble the Fence
1.
Fit the 5/16"-18 x 2
1
⁄
2
" T-Bolts (2) up through the slot in
the Adjustable Fence (1).
2.
Fit the Small Hold Down Clamp with Pivot (4) onto the
5/16"-18 x 2
1
⁄
2
" T-Bolt (2) nearest the end of the fence
with the Adjustable Stop and thread on an Easy-to-Grip
1" Round Knob (5).
3.
Fit the Large Hold Down Clamp with Pivot (3) onto the
other 5/16"-18 x 2
1
⁄
2
" T-Bolt (2) and thread on an Easy-to-Grip
1" Round Knob (5).
Assemble the Base
>
The Small Parts Taper Jig is designed for use on table
saws whose right miter slot is between 4" and 6
1
⁄
2
" from
the right edge of the saw blade.
The Small Parts Taper Jig has three sets
of holes for mounting the Miter Bar (7) to the jig Base (6) to
accommodate the varying distance on different table saws
from the right miter slot to the right edge of the saw blade.
Choose the set of holes that will result in trimming the least
amount from the jig Base.
1.
Choose the appropriate set of Miter Bar (7) mounting holes
for your particular saw.
2.
Attach the Miter Bar (7) to the underside of the jig
Base (6) with the two 1/4"-20 Countersunk Screws (8)
driven through the top of the jig Base. Make sure that the
screws are fully tightened.
Assembly the Fence
Assemble the Base
Quantity
1
Adjustable Fence
1
2
5/16"-18 x 2
1
⁄
2
" T-Bolt
2
3
Large Hold Down Clamp with Pivot
1
4
Small Hold Down Clamp with Pivot
1
5
Easy-to-Grip 1" Round Knob
2
6
Base
1
7
Miter Bar
1
8
1/4"-20 Countersunk Screw
2
9
5/16"-18 Countersunk Screw
1
10
Easy-to-Grip Tall Handle
1
11
Anti-Slip Strip
2
12
5/16"-18 x 1
1
⁄
2
" T-Bolt
2
PARTS LIST
Before every use, make sure the 1/4”-20
Countersunk Screws (8) holding the Miter Bar (7) to the
jig Base (6) are fully tightened. If loosening becomes a
problem, apply thread-locking liquid to the screws and
fully tighten them.
5
4
1
2
3
8
10
11
11
6
7
9
