Page | 17
Rhythm Programming
Press the [PROGRAM] button to activate the Rhythm Program mode. The LED will indicate that the
rhythm program function is on by showing [Pr9]. You can then play the keyboard and record your
percussion track (up to 46 percussion beats). To listen to your piece touch the [PLAYBACK] button and
the keyboard will playback your edited percussions. You can then play along to your recorded percussion.
You can also adjust the speed of the playback using the [TEMPO +/-] buttons. To cancel the Programming
mode, touch the [PROGRAM] button again.
Demo Songs:
Touch the [DEMO] button to play a demo song. The LED display will show [dXX] where XX is the number
of the demo song, from 00 to 39. By pressing the + and - button on the numerical keypad you can choose
the demo song you require. There are 40 demo songs to choose from in total. The keyboard will finish the
chosen song and then play the next song. Touch the [DEMO] button again to exit the demo mode. Refer
to Appendix IV. for a list of the available Demo songs.
Setting Memories M1 and M2
The keyboard has two built in memories for saving specific tones, rhythms, and tempos. Before
performing, select the TONE, RHYTHM and TEMPO you wish to use. While holding the [MEMORY]
button, press the [M1] or [M2] button, the LED display will show [S1] or [S2] and this will save the
keyboard settings to that memory. You can access the stored settings by touching the [M1] or [M2]
buttons before performing, the LED display will show [n1] or [n2].
Note that the M1 and M2 memories
will be cleared after the keyboard is switched off and back on again.
1
2
1
2
