F
EATURES
S
PECIFICATIONS
Enclosure Features
•
High Current Binding Posts
•
Constructed with 1/2" MDF
•
Covered with High Density Carpet
•
Wired Exclusively with Rockford Accessories
Specifications subject to change without notice
Speaker Features - P3S - DVC (Dual Voice Coil)
•
High modulus closed conical cone and ABS/Acrylic dustcap assembly geometry.
•
Kevlar fiber reinforced semi-pressed paper cone.
•
Tear & fatigue resistant poly-cotton spider.
•
High density compressed half-roll sealed poly-foam surround.
•
High temp voice coil with spun-laced Nomex™ insulating reinforcement collar.
•
Optimized motor magnetics with extended pole and bumped vented backplate.
•
Fatigue resistant and reduced strain "stitched on" flexible lead wire design.
•
Multi-point high-temp/high-strength neck joint bonding technique.
•
Rigid die-cast aluminum low profile frame.
•
Custom insulated/isolated compression input terminal assembly.
•
Proprietary spider venting/cooling technique.
P3L-S10 (Single 10" DVC)
Nominal Impedance (Ohms)
4
Power Handling (Watts-RMS/Peak)
300 / 600
Internal Box Volume (ft
3
/liter) 0.40
(11.33L)
Overall Dimensions (HxWxD)
13.5” x 19.0” x 5.25” – 3.25”
(cm)
(34.29 x 48.26 x 13.34 – 8.25)
bottom – top
P3L-S12 (Single 12" DVC)
Nominal Impedance (Ohms)
4
Power Handling (Watts-RMS/Peak)
400 / 800
Internal Box Volume (ft
3
/liter) 0.60
(16.99L)
Overall Dimensions (HxWxD)
13.5” x 27.375” x 5.25” – 3.25”
(cm)
(34.29 x 69.53 x 13.34 – 8.25)
bottom – top
High-temp voice coil with spun-laced Nomex™ re-inforcement collar.
Vented spider cavity.
Tear and fatigue resistant
poly-cotton spider.
High density compressed
half-roll sealed
poly-foam surround
Optimized motor magnetics
with extended pole piece.
Rigid die-cast aluminum low profile frame.
Custom insulated 10-AWG
nickel plated push terminals.
Kevlar fiber reinforced semi-pressed paper cone
and ABS/Acrylic dustcap assembly.
Decorative aluminum trim ring.
