Rockford Fosgate Punch 3X, Руководство пользователя

Страница: 7 / 24

1. Gold Plated RCA Jacks
All input and output RCA jacks are gold plated. The gold plated
finish resists tarnishing and corrosion from interfering with the
signal quality.
2. Power Terminals
The B+, Rem and Gnd connections are made using gold plated
screw terminals on the barrier strip. The gold plating resists tarnish
and corrosion and maintains connection integrity. The terminals
allow easy connection of the power wires through the use of forked
lugs or bare wire up to 12 gauge. The barriers help prevent shorting
from frayed wires.
3. LED Power Indicator
The LED, located by the input jacks, provides a visual indication of
the status of the crossover, lighting when the unit is turned on.
4. Crossover Cards
Crossover filter functions are determined by the use of plug in
cards. Each card can be configured for high-pass, low-pass and full
range operation. Resistors on each module determine the operat-
ing frequency.
5. Input Mode Switch
When the input mode switch is in the two channel position the
front input jacks feed all the filters. When set to the four channel
position, the front and rear input jacks feed the respective filters.
Front and rear channels are summed for the non-faded filter.
6. Phase Switch
The phase switch allows easily inverting polarity on the non-faded
output to compensate for phase inversion in the system.
7. Mounting Holes
The crossover must be mounted on a flat surface. Two mounting
holes in the bottom allow securing the crossover.
8. Fusing
The crossover has a 1/2 amp AGC fast blow power protection fuse.
If it is necessary to replace the fuse, use only the same type and
rating or the warranty may be voided.
– 3 –