Rockford Fosgate Power 100HD, Руководство по установке, Страница: 8 / 12

If the speaker fuses for the Power 100HD are excessively large or are eliminated, the internal fuses
will blow if the speaker shorts. Replace only with recommended fuse.
SPECIFICATIONS
POWER RATINGS:
4 Ohms: 15 Watts per channel continuous power, 4 channels driven into 4 Ohms, from 20 to
20,000
Hertz, with less than 0.05% THD + N (Total Harmonic Distortion plus Noise).
4 Ohms: 30 Watts per channel continuous power, 4 channels driven into 4 Ohms at 1000 Hertz,
with less than 0.1% THD + N.
2 Ohms: 25 Watts per channel continuous power, 4 channels driven into 2 Ohms, from 20 to
20,000 Hertz, with less than 0.10% THD + N (Total Harmonic Distortion plus Noise).
POWER RATINGS: 2 CHANNEL (Bridged)
4 Ohms: 60 Watts per channel continuous power into 4 Ohms, 2 channels driven, from 20 to
20,000 Hertz, with less than 0.1% THD + N.
Frequency response: 20 to 100,000 Hertz +.5 -3 dB.
Damping Factor: At circuit board:
over 50 (referred to 4 Ohms)
Signal to noise ratio:
Over 80 dB, unweighted.
Slew factor: over 5
IM distortion (IHF): Less than 0.05%
Input Gain:
Variable from 40 dBV to 14 dBV
Factory pre-set at 28 dBV (correct for
500 millivolt-rated source units).
Protection :
The Power 100HD is protected externally by a 15 Ampere in-line fuse , and Eight 4-Ampere blade
fuses provide internal protection.
Dimensions:
10 inches Long by 7 inches Wide by 1.5 inches High
6