11
O
PERATION
– T
UNER
Basic Operation
NOTE
: This system does
not
play CD-R, CD-RW or MP3 discs.
To Play a CD
1. Insert the CD into the CD slot, label side facing up.
2. CDP PLAY will auto-select and the CD will begin playing track 1 immediately.
3. Use UP and DOWN buttons to change tracks.
To Eject a Disc
1. Press the
(Eject) button and the CD will stop playing and eject.
2. Remove the CD from the source unit.
CAUTION
: To prevent damage to the CD and/or source unit ensure the CD is
removed after it has been ejected.
NOTE
: After a CD has been played and ejected, press the POWER button once to return to TUNER
mode.
Panel Display
While playing a disc the panel will display DISC, TRACK, the track number and the time played.
!
O
PERATION
– CD P
LAYER
SELECTING A STATION
Press the
(up) or
(down) button once and the Tuner will rapidly proceed to the next
(up) or pervious
(down) station the tuner can receive.
Press and holding either the
(up) or
(down) button for 2 seconds will put you into TUNER
MANUAL mode. Holding the button will manually search up or down at a rate of one step. After
the frequency has move five steps continuing to hold the button will allow rapid searching. In FM
a step equals 0.20 of a frequency, in AM a step equals 10.
PRESET BUTTONS
Each Tuner mode—FM1, FM2, FM3, FM4, AM1 and AM2—has 6 presets for a total of 36 presets.
To Set a Preset Button
1. Tune the Tuner to the station you wish to program.
2. Press and hold any preset button (1 to 6) for three (3) seconds and it will program that
setting.
AUTO MEMORY STORE
If you want the Tuner to select the most powerful stations in order of their signal strength and
assign them to Preset buttons 1 to 6, in the tuner mode of FM3, FM4 or AM2 you can use Auto
Memory.
1. Press the Power/Tuner Mode button to select where the channels are to be stored, either FM
or AM. In FM, Auto Memory will store 12 stations, six (6) each in FM3 and FM4. In AM,
Auto Memory will store 6 stations in AM2.
2. Press and hold the CLK/A.MEM button until A\MEMO appears on the display. The Tuner will
scan the entire dial.
3. Auto Memory will store radio stations independently in the selected tuner bank (FM3 and
FM4 or AM2).
