Страница 1: ...P Output Level Adjustment The output level control is used to match the output of the audio source NEG Batte Switched 12V to REM ess than 18 POS When utilizing high lo vel for input signal the auto turn on feature is active _CAUTION Gain I Level Adjustment The amplifier s Gain I Level should be set to the lowest position 1 I I I I I I REM Out The REM is an output to turn on off cdditional accessor...
Страница 2: ...94 or 2 39mm for the LED through hole 3 Install the remote from the back side of the panel aligning the knob shaft and LED with the drilled holes 4 Install the cover plate washer and nut Do not over tighten the nut just tighten until firm and secure 5 Turn the knob shaft counter clockwise to it s lowest setting Position and install the knob 6 Connect the cable to the back of the remote Panel Insta...
Страница 3: ......
