Such button numbers are sufficient enough for you to control the pop games. You may customize
these buttons as different movements, acts or weapons control through the game software to
approach the best gaming performance.
5. Gamepad LED indicator
After you installing the batteries (2 AAA), the LED indicator on the gamepad will be on when you
pull any buttons or D-pad.
6. Channel Selector
There are two channels selected for gamepad or joystick.
If the gamepad is set at channel 1, the
joystick should be set at channel 2. Contrarily, if the gamepad is set at channel 2, the
joystick should be set at channel 1.
5-4 The characteristic of Joystick
1. 3D Ergonomic Handgrip with Rudder Function
This joystick is equipped with the 3D ergonomic handgrip, which offers 360-degree auto centering
movement and the precise hand-twist rudder control for your instant maneuver in gaming.
2. Hat Switch (View Finder)
The realistic 8-way coolie hat switch can be set as a view finder and allow you to view your
surroundings from your aircraft’s cockpit in the flight simulation games. Or you may set it as the
weapon control system for efficient control to category weapons in flight missions.
3. Rotary
Throttle
This centralized throttle has standard momentum function, which is required by flight simulation
games. You may accelerate or slow down the aircraft speed by rotating this switch for efficient
maneuver control.
4. Functioning
Buttons
There are 8 independent functioning buttons equipped on this powerful game control system. The
functions of A (The fire trigger), B, C, D, E & F (Function buttons in the handgrip) and G & H
(Function buttons at the base) are all game dependent. Refer to the game manual for the best use
for these buttons, and such numbers of button is sufficient enough for you to control pop games.
5. Channel
Selector
There are two channels selected for gamepad or joystick.
If the gamepad is set at channel 1, the
joystick should be set at channel 2. Contrarily, if the gamepad is set at channel 2, the
joystick should be set at channel 1.
5-5 The characteristic of Receiver
1.There are three LED indicators on the receiver. One is the power LED and always "ON" when it
have been connected. The other two LED indicators are represent the gamepad and joystick.
2.The LED indicator of the gamepad and joystick will only flash when any buttons or D-pad is
pushed or pressed.
