Rockbox Sansa c200v2 Series, Руководство пользователя

Страница: 57 / 216

Chapter 7. Playback Settings
57
Track Gain If Shuffling. Maintains a constant volume between tracks if
Shuffle
is set to
Yes
. Reverts to album mode if
Shuffle
is set to
No
.
Off. Do not process replaygain information, i.e. turn off the replaygain function.
Prevent Clipping. Avoid clipping of a song’s waveform. If a song would clip during
playback, the volume is lowered for that song. Replaygain information is needed
for this to work.
Pre-amp. This allows you to adjust the volume when replaygain is applied. Replaygain
often lowers the volume, sometimes quite much, so here you can compensate for
that. Please note that a (large) positive pre-amp setting can cause clipping, unless
prevent clipping is enabled. The pre-amp can be set to any decibel (dB) value
between -12 dB and +12 dB, in increments of 0.5 dB.
7.8. Track Skip Beep
Controls the volume of the beep that is heard when skipping forward or backward be-
tween tracks. The beep is disabled when set to
Off
.
7.9. Auto-Change Directory
Control what Rockbox does when it reaches the end of a directory. If
Auto-Change Di-
rectory
is set to
Yes
, Rockbox will continue to the next directory. If
Auto-Change
Directory
is set to
No
, playback will stop at the end of the current playlist. Using
the
Random
feature requires you to first generate a folder list via the Random Folder
Advance Configuration plugin (see section 12.4.14 (page 142 )).
Note: You must have the
Repeat
option set to
No
for
Auto-Change Directory
to
b
function properly.
Note: This feature only works when songs have been played from the file browser. Using
b
it with the database may cause unexpected behaviour.
7.10. Constrain Auto-Change
If enabled and you have set
Start File Browser Here
to a directory other than root,
Auto-Change Directory
will be constrained to the directory you have chosen and
those below it. See section 4.1.2 (page 25 ).
The Rockbox manual
(version 3.13)
Sansa c200v2 Series