Rock The Bike Icycleta, Руководство пользователя

Страница: 3 / 9

5
4
assembly
1. Loosen the axle nuts counterclockwise to the end of the
axle (a).
2. Loop the chain over the chainring (b), and over the teeth of
the wheel cog (c). Then loop the belt over the pulley (d).
5. Check chain tension by rotating the pedals backwards a few
turns. If there is a tight spot in the rotation, loosen the skewer and
move the wheel backwards so the chain is taught as possible
without causing a tight spot in the rotation. If the chain is loose
and sagging, loosen the skewer and pull the wheel forward.
WHEEL
WHEEL
For wheels with axle skewers, refer to the Fender Blender Pro user
manual for tightening instructions: rockthebike.com/fbpro-manual/
(
a
)
(
c
)
(
b
)
ASSEMBLY
For more help and details about wheel install, watch
videos at: rockthebike.com/troubleshooting-tips
To check wheel alignment, look
past the wheel to see equal
distance on both sides.
4. Lift the wheel and slide the axle into the wheel mounting
slots. Pull the wheel toward you, and while holding the chain
taught, adjust the wheel so it is straight and aligned with the
frame. Then have a friend tighten the axle skewer with an
adjustable wrench wrench (e).
(
d
)
(
e
)