Rock Solid Metered PDU Manual GS Geiger Group ∙ 181 Sand Creek Rd Ste I-1 ∙ Brentwood ∙ CA ∙ 94513 ∙ USA
6
5.
Configuring the PDU
5.1.
Logging onto the PDU
The PDU can acquire an IP address using DHCP or failing that will set the static IP 192.168.0.216. If your
network has a DHCP server follow the "Using DHCP" instructions below to log in to the PDU, else follow the
instructions in the "Using the default IP" section.
5.1.1.
Using DHCP
1.
Hold the "Function" button down and release after 2 beeps.
2.
The PDU meter will display the 4 octets of the current PDU IP address in sequence.
3.
Use your browser to connect to the PDU, enter the PDU IP address as the URL.
4.
Use the credentials username: snmp and password: 1234 to log in to PDU.
5.1.2.
Using the Default IP
1.
Connect your computer directly to the PDU with an ethernet cable.
2.
Configure your computer to be on the same network as the PDU (example IP 192.168.0.1).
3.
With the IP 192.168.0.216 as the URL, use your browser to connect to the PDU.
4.
Use the credentials username: snmp and password: 1234 to log in to the PDU.
5.2.
Changing User Credentials
Once you are logged in, change the user's login and password. We highly recommend changing the default
username and password, leaving it would create a serious security flaw.
To change the credentials:
1.
Click on the User link.
2.
Enter the old username and password
3.
Below that enter the new username and password. Make sure you do not forget the new
credentials or you will be locked out and will have to reset the PDU to factory defaults if you do so.
4.
Click on Apply.
5.
Login again to continue PDU configuration.
Содержание RSM0-30AM-16N2
Страница 12: ......
