RCT3:
Use a 2 mm hex wrench to remove the low speed adjuster knob
screw. Remove the low speed compression adjuster knob.
Use a 6 mm socket wrench to remove the knob retaining nut. Remove the
compression mode adjuster knob.
RC:
Use a 4 mm hex wrench to remove the knob retaining nut.
Remove the low speed compression adjuster knob.
Use a 30 mm socket wrench to loosen the damper top cap.
Remove the Charger Damper assembly from the upper tube.
Clean the upper tube threads with a rag.
Use your fingers or a pick to remove the compression top cap o-ring.
Discard the o-ring.
Use your fingers to install a new o-ring.
2
2 mm
RCT3
6 mm
RCT3
4 mm
RC
3
30 mm
4
25
Charger Damper™ Removal
