Roche OMNI C, Инструкция по эксплуатации

Страница: 34 / 152

1 Introduction
1-26
Instructions for Use, Roche OMNI C, Rev. 4.0, December 2002
Fig. 26
Make sure that no air bubbles have formed in the inner electrolytes of the electrodes
(see Fig. 27). If there are air bubbles between the contact pin and the membrane,
there will not be effective electrical conduction. Result: calibration and measurement
errors!
• If necessary, remove air bubbles by holding the electrode vertically and by tapping
lightly with your fingernail against the electrode body (see Fig. 27)..
Fig. 27
• Insert the electrodes, beginning at the right and proceeding left according to the colour
code.
• Push all electrodes slightly to the right so that they are lined up together without gaps.
17. Insertion of the reference electrode
• Insert the new reference electrode.
Fig. 28
free of air bubbles!