Roche CoaguChek Pro II, Руководство оператора, Страница: 95 / 206

95
CoaguChek
®
Pro II · Operator’s Manual
The setting for Time of day applies to all lockouts
based on date intervals. The setting for First day of
week applies to lockouts in weekly intervals only.
6 Touch or to enter the desired time and day.
7 Touch to save this setting, or touch to exit
this menu without saving any changes. The display
automatically returns to the previous screen.
STAT Test Configuration
Quality control tests ensure consistent quality and
accurate measurements. In emergency situations,
however, it may be necessary to perform a test without
delay. To override an active lockout
(3)
, you can allow
STAT Tests (STAT = S hort T urn A round T ime).
You can set the number of tests (up to nine) permitted
beyond the lockout. Once the number of STAT Tests
allowed has been reached, additional tests cannot be
performed until you have successfully completed a
quality control test. The default setting is three STAT
tests.
The results of STAT tests are always identified by the
label
STAT Test when they are displayed.
u
To perform a STAT test (120)
(3)
QC, operator, or new lot lockout
3 Meter Setup
• 3