Roche CoaguChek Pro II, Руководство оператора, Страница: 120 / 206

120
CoaguChek
®
Pro II · Operator’s Manual
1 After the test result is displayed, touch . You
will be prompted to remove the strip.
2 Remove the test strip from the meter.
• Safety information (17)
3 Power the meter off.
4 Clean the meter if necessary.
See Chapter 8, Maintenance and Care starting with
8.2 Cleaning and disinfecting the meter (155)
r
To perform a STAT test
STAT tests are a limited number of tests that can
be performed in emergency situations. If the meter
is configured to perform STAT tests, you have the
option of performing a test by choosing STAT even
though a QC Lockout is in place.
See STAT Test Configuration (95)
1 To perform the measurement without performing
a quality control test, touch Patient Test :
2 Touch the button to select the parameter you want
to use.
3 Touch to confirm the number of remaining
STAT tests.
4 Testing a Blood Sample
• 4