Roche ACCU-CHEK Inform II, Руководство оператора

Страница: 22 / 212

1
• Introduction
22
Electrostatic discharge (ESD) is an electrical charge at
rest, most commonly known as static electricity. If the
Accu-Chek Inform II meter experiences a form of ESD
before or after running a blood glucose test, the test
result will be stored in the meter memory and transmitted
when the meter is docked in a connected base unit or
when a wireless connection is established. If the meter
experiences ESD during a blood glucose test, an error
message is displayed and no blood glucose result is dis-
played by the meter or stored in the meter’s memory. The
blood glucose test will need to be repeated.
To avoid ESD, do not use the meter in a very dry environ-
ment, particularly one in which synthetic materials (e.g.,
carpets) are present that might cause damaging static
discharges, or near electronic equipment that is a source
of electromagnetic radiation.
Local Area Network: protection
from unauthorized access If this product is connected to a local area network, this
network must be protected against unauthorized access.
In particular, it must not be linked directly to any other
network or the Internet. Customers are responsible for
the security of their local area network, especially in pro-
tecting it against malicious software and attacks. This
protection might include measures, such as a firewall, to
separate the device from uncontrolled networks as well
as measures that ensure that the connected network is
free of malicious code.
Wired network connection If connected to a local area network, the Accu-Chek
Inform II Base Unit or Accu-Chek Inform II Base Unit Hub
must be protected against unauthorized access by means
of a
strong password management . Observe your own
facility guidelines on password management where avail-
able, or apply the following rules: