ROCAM ATHENA BM, Инструкция по эксплуатации

Страница: 5 / 9

5
4.3 Use Suggestions
ATHENA BM buffet trolley has been designed and created to work exclusively
through the “bain-marie” system, therefore It shall never be turned on without water
in the well.
Gastronorm pans (with food) can be placed inside the general well in all the possible splits combinations.
Pay close attention to the contact between the water in large quantity and the wooden parts to
avoid blisterings and scrapings of the same.
The final customer must regularly check the food temperature and, if necessary, has to change the
keeping temperature according to the requirements.
Before switching on, fill the well with a moderate amount of water and, in any
case, do NEVER exceed with water in the well (see max water level marked on
the well’s side).
5. Cleaning and Maintenance
WARNING:
Before any cleaning operation unplug the device from the electrical system. Never
wash the appliance with water jets in order to prevent water seepage inside the
electrical components.
Clean the appliance at the end of the service.
On Bain Marie (BM) models the well has to be emptied through the
drain cock (see image on the right). Place a bucket under the drain
cock and turn the lever, make sure it is closed once the tank will be
empty. Once the well will be empty, it is recommended to dry it up
with a cloth or a sponge. On Hot shelf models (PC) clean the
temperate glass top with a soft cloth and with glass-suitable products.
The laminate parts can be cleaned with a damp cloth- In case of
stubborn stains, use a damp cloth with some alcohol, do never use
corrosive or abrasive detergents.
Drain cock
“MAX” water level mark with GN pans
height 150mm
“MAX” water level mark with GN pans
height 200mm