9
English
Seat heating
1. Seat temperature
Press seat heater button to activate.
2. Temperature adjustment
Press seat heater button again to adjust temperature
until desired setting. There are 4 temperature levels.
Note:It will take a few minutes to heat the seat. The setting of desired temperature will be saved and locked in memory.
Temperature:OFF 35˚C 37˚C 39˚C
User setting
The user setting function allows the storage of six user profiles in the quick access memory.
Product setting adjustment
Light
The LED light installed at the rim of the toilet will activate at the established time, so that the user may find the toilet at night.
1. Select function setting
With the seat occupaid adjust the cleaning function
settings at your desired level.
-Water pressure
-Water temperature
-Nozzle position
-Massage (Oscillating/ Pulsating clean)
-Dryer temperature
Those settings are temporally stored in memory.
2. Select user setting
Press user button for 3 seconds, and the display will
start blinking. You can save those temporally stored
settings at the appointed user number. Repeatedly
press user button to select desired user.
3. Confirm
Press stop to confirm the setting.
Light
Press light button to activate and deactivate light
function manually.
Auto light
1. Auto light
Press light button for 3 seconds to switch between
(auto light) and (auto light off)
2. Adjustment time
With
mode selected, press or button for
time adjustment.
3. Confirm
Press stop to confirm the setting or wait 5 seconds.
Auto light ON
Auto light OFF
Example: Select 8h starting at 22:00pm. The night light will activate
daily from 22:00pm to 6:00am.
Setting time
ON
OFF
Time
