Roc Hobby 1:10 Mashigan, Инструкция по эксплуатации, Страница: 8 / 35

EN
07
2-3S 锂电或5-9芯镍氢电
阻抗
2S 锂电或5-6芯镍氢电 540或 550 电机≥8T 或 RPM <45000@7.2V
前进： 0.0008 欧姆，后退： 0.0016 欧姆
Battery
Charging Interface
Low Voltage Warning
Life time
Channel Resolution
Distance
6V DC 1.5AA*4
NO
<4.2V
According to battery type
1024
>300m (Ground）
2-3S 锂电或5-9芯镍氢电
阻抗
2S 锂电或5-6芯镍氢电 540或 550 电机≥8T 或 RPM <45000@7.2V
前进： 0.0008 欧姆，后退： 0.0016 欧姆
Temperature Range
Humidity Range
Color
Online Update
Data Interface
Antenna Type
-10°C ~ +60°C
20-95%
Black
No
No
Built-in single antenna
2-3S 锂电或5-9芯镍氢电
Certification
Weight
Size
CE, FCC ID:N4ZG4P00
220g
160*193*97mm
2-3S 锂电或5-9芯镍氢电
阻抗
2S 锂电或5-6芯镍氢电 540或 550 电机≥8T 或 RPM <45000@7.2V
前进： 0.0008 欧姆，后退： 0.0016 欧姆
Model Type
RF
2.4GHz Protocol
RF Power
Channels
Product Model
Car, Boat
2.4GHz
ANT
<20dBm
4
FS-G4P
Instructions
1、 T ransmitter specification ( FS-G4P)
Function settings:
1. Turn on the transmitter and make sure it is connected to the receiver.
2. Hold the control surface at the desired failsafe position.
3. Press and hold the bind button for 3 seconds, if the G.LED starts flashes for 2 seconds, indicating that the
settings are successful.
Function settings:
To switch between beginner and normal modes, press and hold the CH4 button while turning the steering
wheel completely counterclockwise as far as it can, and at the same time, power on the transmitter.
7、Beginner Mode
Beginner mode is designed for the people who is new to the hobby.
BThe G.LED will be in a state of two-time flashing and on off, and keep the state for 3 seconds during power on.
In this mode the throttle has been limited to 50 percent, The channel range defaults has been set to
1250~1500~1750us.
Note: By default, the system is set to normal mode. If the system has set to beginner mode.
Note: The fail-safe function has no default set at the factory and as such must be set manually. If no failsafe
setting has been set, then the receiver will not output anything when signal is lost.