Robustel GoRugged R3000-3P User Guide
21
to download diagnose data.
Event/Log
Item
Description
Download
Select the log messages you want to download.
Log Level
Select the Log level in the drop-down menu: DEBUG, INFO, NOTICE, WARNING, ERR,
CRIT, ALERT, EMERG.
3.10
Configuration -> Link Management
This section allows users to set the WAN link and the related parameters.
Link Management
Item
Description
Default
WAN Link
Selected from “Cellular Only”, “Eth0 Only”, “Eth0 as primary and if fail use
cellular” and “Cellular as primary and if fail use Eth0”.
1.
Cellular Only: Select to make cellular as the only WAN link.
2.
Eth0 Only: Select to make Eth0 as the only WAN link
3.
Eth0 as primary and if fail use cellular: Select to make Eth0 as the primary
WAN link and cellular as the secondary WAN link.
4.
Cellular as primary and if fail use Eth0: Select to make cellular as the
primary WAN link and Eth0 as the secondary WAN link.
Cellular
Only
ICMP Detection Primary
Server
Router will ping this primary address/domain name to check that if the
current connectivity is active.
Null
ICMP
Detection
Secondary Server
Router will ping this secondary address/domain name to check that if the
current connectivity is active.
Null
ICMP Detection Interval
Set the ping interval time.
Null
ICMP Detection Timeout
Set the ping timeout.
30
ICMP Detection Retries
If Router ping the preset address/domain name time out continuously for Max
Retries time, it will consider that the connection has been lost.
3
Reset The Interface
Enable to reset the cellular/ETH0 interface after the max ICMP detection
retries.
3
