Robusta CYCLONIC 31, Инструкция по эксплуатации

Страница: 17 / 48

17
EN
Proper connection
Only connect the device to a properly installed socket. The socket must also be easily accessible after the
device has been connected. The mains voltage must correspond to the technical data of the device (see
chapter “Technical data”). Only use proper extension cords, whose technical data correspond to those of the
device.
Make sure that the connected mains cable does not get pinched, pose a tripping hazard or get kinked and
that it does not come into contact with hot surfaces.
Proper use
Only use and store the device in enclosed areas. Do not use the device outdoors, in rooms with high
humidity or on hot surfaces.
Check the device and accessories for damages prior to each use. If the device, cord, plug or a fi lter are
visibly damaged do not use the device. Do not attempt to repair the device or to replace parts yourself. In
the event of damage, contact customer service.
Do not use the device if it malfunctions, has vacuumed up liquids or objects or has fallen down. Have the
device repaired by a qualifi ed professional.
Only use the device if it has been completely and correctly assembled! The dust bin and fi lter must be in
place and not be damaged! Dirt that has penetrated the inside of the device could damage the motor. The
dust bin must be shut in order for it to be inserted properly.
Do not subject the device to extreme temperatures, severe changes in temperatures,open fl ames, direct
sunlight, moisture or wetness.
Do not allow the device to fall and do not subject it to strong percussions.
Never place heavy objects on the device.
Do not submerge the device in water or other liquids in order to avoid electrical shocks. Do not fi ll the dust
bin with liquids.
Never touch the device, the cord or the plug with wet hands.
Do not insert anything in the device’s openings/nozzles and ensure that they are not plugged.
Never leave the device unattended when on or when connected to a power supply.
Turn the device off by pulling the mains plug out of the socket
– if you stop using the device,
– if you are fi nished using the device,
– before you change any accessories,
– if an error or fault occurs during operation,
– if liquids or foreign debris have penetrated the device,
– before a storm,
– before you clean the device parts and accessories.
The device must be deactivated when you pull the mains plug out of the socket or insert it in the socket.
Always pull on the plug itself and never on the cable!
Never move the device by pulling it by the cord. Use the handles.
Do not attempt to grease the wheels with lubricants or oil. Otherwise, this may cause
more dust or dirt to accumulate on the wheels.
Empty the dust bin after every use. The fi lters must also be cleaned regularly to
prevent the motor from being overloaded.
Allow the dust bin, plastic dust fi lter, foam fi lter and exhaust fi lter to dry completely
before you reinstall them in the device.
Only use original spare parts provided by the manufacturer.
Store the device in a cool, dry area that is not accessible to children and animals
when not in use.