Robus Vantage 3 Series, Быстрый старт

Страница: 7 / 8

Adjusting the Leg Angles
Adjust the leg angle by lifting
up the leg angle lock. Move the
leg to the desired angle, and
press down on the lock to
secure the leg.
Extending the Tripod Legs
Turn each twist-lock clockwise, and
extend each leg to the desired length.
Turn the twist-locks counterclockwise to
tighten.
included wide feet or spikes.
To tighten or loosen the
spikes and wide feet ,
use the included
smaller hex key.
Swapping the Feet
The tripod comes with the rubber feet
installed. To swap the feet, unscrew the
rubber feet, and replace them with the
Swapping the Flat Plate and Video Bowl
1. Press the plate lock in so the gears
engage, and swing the lock up to
loosen the plate.
2.
Pull the platform release, and
lift the flat plate from the yoke.
3. Insert the video bowl into the
yoke, and press it into place
until it locks. Before you
proceed, tighten the plate lock.
1
2