Robur OCDS006, Инструкция по установке и эксплуатации

Страница: 6 / 16

6
operation of the system. In this way, unwanted starts and
stops of the system will be avoided and optimal comfort
in the environment will be guaranteed.
Figure 3.1
Accessing the remote control
Figure 3.2 Installation of the remote control
4. Perform electrical connection to the terminal block (Figure
3.3 p. 6).
The connection is not polarized.
Figure 3.3 Electrical connection of the remote control
5. Fix the remote control to the fixing box by first inserting the
upper part and pivoting on it until it is completely closed
(Figure 3.4 p. 6).
Figure 3.4 Closing the remote control
6. Power the boiler.
7. The installation is now complete. If the remote control has
been correctly installed, it will be powered up and the con-
nection message will appear on the LCD display for a few
seconds (Figure 3.5 p. 6).
Figure 3.5 Remote control connected
8. Once the connection has been established, the normal oper-
ating condition will be presented (Figure 3.6 p. 6).
Figure 3.6
Operative remote control