6/6
Division of BETA UTENSILI SPA, Via Volta, 18 - 20845 SOVICO (MB) ITALY Tel. +39.(0)39.20771-Fax + 39.(0)39.2010742
10
)
FITNESS FOR USE
Before starting working, the user should test the installed accessory for serviceability and performance, to
prove the entire system is fit for use.
11)
INSPECTION AND MAINTENANCE
Inspections and maintenance jobs should be carried out by trained personnel, who should perform
accurate tests during operation.
Below is a list of tests to perform at such intervals as stated in the table “
Maintenance jobs and
inspections”
.
•
VISUAL TEST: making sure that the accessory is free from surface defects, including
cracks, indentations, cuts, fissures and abrasions. Check the accessory for burrs or sharp
edges which may damage the belt.
•
DEFORMATION TEST: making sure that the accessory has not got damaged.
12)
SCRAPPING ACCESSORY
The accessory should be scrapped by cutting, so that it can no longer be used, if:
-
it is permanently worn compared to the original size;
-
any cracks or distortions are shown, and/or the sections have become small compared to the
original size, or
-
any burrs or sharp edges that cannot be recovered are found.
Whenever used
Month
Year
General visual inspection
x
Deformation
x
Maintenance jobs and inspections
Type of inspection
