RoboVent VENTBOSS G130, Руководство пользователя, Страница: 10 / 14

10 VENTBOSS
•
G130 OWNER’S MANUAL
SECTION 400
OPERATION
The VentBoss G130 Portable is a compact portable
fume extractor that provides convenient mobility in a
small but powerful package. The G130 plugs into a
standard 120 volt 20 amp outlet and comes with a 15’
long by 2” diameter flex hose. Various hood and nozzle
combinations are available for the G130 for source
capture along with several sized Fume Guns. The
VentBoss G130 will support one smokeless fume gun.
GENERAL OPERATION
The core of the VentBoss G130 Portable is the industrial
1700 watt high efficiency motor with tangential
discharge. The extra long life high performance blower
generates up to 110" WG pressure to run one smokeless
fume gun or any one of the accessory hoods.
When using a hood or nozzle place the attachment as
near to the welding operation as possible. Placing the
hood slightly upward will aid in smoke capture.
The VentBoss G130 Portable comes pre-assembled
for immediate use. Please go through the packing
list to make sure you have all the required parts.
The cartridge filter and spark arrestance filters and
baffles are already installed inside the unit.
Before using your VentBoss G130, please check the
following:
1. Make sure the latch on the G130 Motor/Cartridge
Plenum is secured.
2. Connect the flex hose to the inlet nozzle and secure.
3. Connect the proper nozzle or accessory to the end of
the flex hose.
4. Make sure the G130 is plugged into a dedicated 20
amp 120 volt @ 60 Hz. outlet.
G130