QUAD/Y6/X8
TAROT GIMBAL
Three mounting screws
Tarot brushless gimbal with
QUAD/Y6/X8
mounting plate
Three spacers
1 Attach camera
Your Tarot gimbal is compatible with a GoPro HERO3, available from
Remove the two screws securing the blue face plate.
Remove the plate, and loosen the set screw.
face plate
remove
Slide camera into housing with the lens nearest
the top-right corner.
remove
loosen
1
2
!
Important note
: Make sure that the WiFi on your GoPro is
turned
OFF
at all times when in use with your aircraft.
