10.1 Menu Functions in Detail
System-Setup Menu
Function
Description
Date Format
Select
y/m/d
or
m/d/y
or
d/m/y
Daylight Saving Time
Enable or Disable, according to your requirement.
Date
Set the current date.
Time
Set the current time.
Time Zone
Set your time zone, using Universal Time (GMT). For example, Chicago is GMT-6
Language
Defaults to English. Other languages are available upon special order.
Video Mode
Set to NTSC (North America) or PAL (Europe & Far East). Default: NTSC.
Delay Time
Post Trip delay after ignition has been turned off—0 to 3600 seconds. User-
settable--default is 5 seconds.
Speed Unit
Choose MPH (Miles per Hour) or KPH (Kilometers per Hour). Default is MPH.
Zoom Channel
Select the camera that will be automatically displayed when the DVR is powered.
Password
Enter the current password before changing to a new one. Note: You must enter
the current password after pressing OK; otherwise, the DVR will remain in the
current state, and the system will not recognize the updated password.
New Password
This is where you enter the new Password.
System-PTZ Menu
Function
Description
Protocols
Select from PELCO-D (default), PELCO-P.
Bit Rate
For RS-485 Control: Select from 2400/4600/9600/38400/57600 bits/second.
Channel 1 Address
Assign Channel 1 Device Control Address.
Channel 2 Address
Assign Channel 2 Device Control Address.
Channel 3 Address
Assign Channel 3 Device Control Address.
Channel 4 Address
Assign Channel 4 Device Control Address.
System-Info Menu (Read-only)
Function
Description
Device ID
Unique serial identifier for the DVR.
Software Version
Version of operating system software currently installed.
IMIE
If using 3G/4G, the unique ID number of the network or module.
3G Signal
Signal strength of the 3G/4G network.
GPS Signal
Signal strength of the GPS signal. AA=None / BB = strength (rmax 3).
Reset CFG
Resets all configuration settings to factory defaults (
Clears all user settings
).
