9
7HENTHEMACHINEHASCOMPLETEDITSTASKOPENTHE
LIDBYRELEASINGTHELOCKINGHANDLE
0RESS DOWN lRMLY ON THE HANDLES UNLOCK THE BOWL
BY TURNING IT IN A CLOCKWISE DIRECTION THEN PULL IT
upwards to free it.
)FTHEFOODHASASOLIDCONSISTENCYREMOVETHEBLADE
ASSEMBLY BY GRASPING BLADE KNOB TO REMOVE THE
BLADETHENEMPTYTHEBOWL
CAUTION CUT HAZZARD
!LWAYSUSESPATULAORSCRAPERTOREMOVEFOODFROM
THEBLADESNEVERUSEBAREHANDS
4OREMOVEFOODRESIDUEFROMTHEBLADESPUTTHEBOWL
BACK SLOT THE BLADE ASSEMBLY BACK OVER THE MOTOR
SHAFTANDRUNTHEMACHINEATHIGHSPEED3IMILARLY
for precleaning, pour a couple of litres of hot water
into the bowl and run the machine for a few seconds
at high speed.
4HE MACHINE CAN BE WASHED WITH A KITCHEN SPRAY
(though not with a power washer).
I M P O R T A N T
Like the bowl and lid, the blade assembly should
also be removed for cleaning after use.
Always allow all metal parts, especially knives,
to dry completely on a plastic rack before assem-
bling components for storage to avoid corrosion.
I M P O R T A N T
Check that your detergent is suitable for cleaning
the plastic parts.
Certain washing agents are too alkaline (e.g.
high levels of caustic soda or ammonia) will
rapidly deteriorate plastic parts.
!FTERCLEANINGTHEBLADEASSEMBLYALWAYSCOMPLETELY
DRY THE BLADES TO PREVENT RUSTING OR AIR DRY METAL
parts on a plastic rack before assembling the blade
FOROVERNIGHTSTORAGE
7HENTHEMACHINEISNOTINUSETURNOFFATSERVICE
DISCONNECTORDISCONNECTFROMTHEPOWERSUPPLYAND
LEAVETHELIDOPEN
Never immerse the motor base in water. Clean
using a damp cloth or sponge.
MAINTENANCE
s$)3-!.4,).'4(%",!$%!33%-",9
2s2s2s2BLADE
ORLITREMINIBOWLBLADEASSEMBLY
!SPECIALTOOLISSUPPLIED
with the machine to
disassemble the mini bowl
BLADEASSEMBLY
s",!$%3
7E STRONGLY RECOMMEND THAT THE BLADES SMOOTH
ONES ARE SHARPENED DAILY USING THE SHARPENING
stone supplied with the machine.
4HE QUALITY OF THE CUT DEPENDS MAINLY ON THE
SHARPNESS OF YOUR BLADES AND THE DEGREE OF WEAR
4HEBLADESAREACTUALLYWEARINGPARTSWHICHSHOULD
BEREPLACEDOCCASIONALLYTOENSURECONSISTENTQUALITY
in the final product.
s3%!,
4HE SEAL ON THE MOTORSHAFT SHOULD BE LUBRICATED
REGULARLYUSINGAFOODSAFELUBRICANT
)NORDERTOKEEPTHEMOTORCOMPLETELYWATERTIGHTITIS
ADVISABLETOCHECKTHEGASKETMONTHLYFORWEARAND
TEARANDREPLACEIFNECESSARY
Replace shaft seals each 3 to 6 months. Lubricate
seals with food grade grease.
s,)$3%!,
4HE LID IS DESIGNED TO BE COMPLETELY WATERTIGHT )N
ORDER TO ENSURE THAT IT REMAINS THAT WAY YOU MAY
HAVETOCHANGETHESEALOCCASIONALLYDEPENDINGON
HOWREGULARLYYOUUSEYOURMACHINE
)F YOU DO NOT USE YOUR MACHINE REGULARLY BETWEEN
USESITISADVISABLETOLEAVETHELIDOPENTOPRESERVE
the lid seal original caracteristics.
s3LIDETHEBLADEASSEMBLY
right down the motorshaft.
s-AKESURETHATTHELOWER
blade is resting on top of
the blade dismantling tool.
s,OOSENTHELOCKINGNUTWITH
the special wrench.
s4O REASSEMBLE THE BLADE ASSEMBY SIMPLY DO THE
SAMEINREVERSEORDER
s$ISCONNECTTHEMACHINE
power cord.
s2EMOVETHEBOWL
s0OSITIONTHEBLADE
dismantling tool on the
motor shaft.
