Robot Coupe Blixer 4, Руководство по эксплуатации

Страница: 7 / 14

6
INTRODUCTION TO YOUR
NEW EMULSIFIER-MIXER
Blixer
® 4
ROBOT-COUPE has developed a new concept in
appliances: the
Blixer
®
.
The Blixer ® combines the features of two well-known
appliances: the cutter and the blender-mixer.
The Blixer
® is perfectly geared to professional
needs. It can perform a number of tasks that you
will soon discover as you use it.
The Blixer
®
will make it easy to prepare mixed liquid
or semi-liquid, raw or cooked meals.
The Blixer
®
replaces the blender which has never
been entirely satisfactory because it cannot process
solid foods.
Thanks to its simple design, all components requiring
frequent handling for maintenance or cleaning can
be fitted and removed quickly.
To make things easier for you, this manual gives a
breakdown of all the various fitting operations.
This manual contains important information designed
to help the user get the most out of the emulsifier-
mixer Blixer
® .
We therefore recommend that you read it carefully
before using your machine.
SWITCHING ON
THE MACHINE
• ADVICE ON ELECTRICAL CONNECTION
Before plugging in, make sure your power supply
corresponds to that indicated on the machine’s
serial number plate.
Your Blixer
®
4 is fitted with a single phase motor :
120 V / 60Hz
• CONTROL PANEL
Red knob = “Off” switch.
Green knob = “On” switch.
Black knob = “Pulse” control.
1 speed 3450 rpm.
ASSEMBLY
1) With the motor base
facing you, place the
bowl onto the motor
base with the handle to-
ward the front. Turn the
bowl just off-center and
to the left as you lower it
onto the base.
2) Then, turn the bowl
back to the right (coun-
terclockwise) locking it
onto the motor base
tabs.
3) Place the blade
assembly onto the motor
shaft. Rotate the blade
assembly until it drops
into place. The bottom
blade should be level
with and just off the
bottom of the bowl.
4) Press the button on the
wiper handle and insert
the wiper shaft through
the underside of the lid
and into the wiper
handle. Then, release the
button on the handle.
It may be necessary to
rotate the parts in order
to align the shaft and
handle. Pull at the parts
a little to make sure they
are locked together.
5) Locate the down-
ward-facing tab on the
bowl lid. Place the lid
on the bowl with the tab
over the bowl handle,
then lock the bowl
clamps over the lid.
W A R N I N G
This appliance must be plugged into an
grounded socket (risk of electrocution).