CoDrone
Warranty
2) Assemble a controller with
components.
3) Connect the board and cable,
while paying attention on color
alignments.
4) Power on the Inventor Board and
CoDrone, then pair both.
▶ Refer “Connect to Inventor Board”
on the right.
1) Check if all components
are prepared.
1. Turn on CoDrone’s power.
2. Turn on Smart Inventor Board’s power.
3. Wait for their connections.
4. LED lights on Smart Inventor Board flicker back and forth by its
center. (meaning it is searching the device nearby)
5. BLE Board’s LED light changes to green.
(meaning its successful connection)
6. CoDrone’s LED stops blinking. (meaning its successful connection)
7. All pairing processes complete.
Warning
If CoDrone’s unexpectedly powers off or pairing fails, repeat theprocedures 1~7 above.
Landing
Button
The rightmost
sensor
The leftmost
sensor
feet
Emergency Stop
*In cases of emergency, press BLE Board’s
switch twice in a row. The drone will stop
its operation immediately.
Control the drone with
the assembled joystick
Up
Down
Turn
Left
Turn
Right
Forward
Backward
Left
Right
Connect to Inventor Board
Depending on LED color on BLE Board, act correspondingly by knowing whateach color
symbolizes. (
Purple
: Operating)
BLE Board Status
Build it - Assemble
Youtube Link
https://youtu.be
/nwFUgs5sKpc
Play it - Control
Visit us
www.robolink.co.kr
Copyright 2017ⓒ Robolink All rights reserved.
Quality Certificate
This certificate ensures protecting rights of consumers who bought CoDrone
Package. Our company will provide paid/free service to our customers, as in
the following details.
1. Warranty Details
: Robolink will conduct following guarantees, under the
provision of Consumer Compensation Rules by Item. If manufactural defect
or spontaneous failure occurs before the expiration of the term of guarantee,
you are qualified to receive free services from us.
2. Term of Guarantee
: Up to 1 year since the purchase date (Each component
in this package has different policies; read the Range of Assurance below)
3. Determination of Assurance
: Will be determined after consultations by
telephone or online services, or by direct discussion in exhibitions.
4. Range of Assurance
(Refer the table below)
Component
CoDrone’s Mainboard
Smart Inventor Board
Charger
Battery
Propellers
Propeller’s Guard
Propeller Motors
Term of Guarantee
1 year since
the purchase
Not applied
2 months since the purchase
Guarantee Exclusions
1. Simply because consumers’change of
mind
2. Maintenance/Repair of devices after
term of guarantee
3. Failure or damage caused by customers’
misuse or mistake
4. Failure not caused from the device itself
5. Arbitrary dismantle or action taken by
customers
6. Problems caused by products from
other companies
Pairing Standby Mode
Red
Use this mode when you pair your CoDrone and BLE Board. In
Communication Mode, press the button once to switch into this
mode. Press the button for more than 5 seconds to make this
mode appear first, instead of Communication Mode.
This mode appears first when you connect its power. If the board
is in Pairing Standby Mode (Red), press its button once to change
into Communication Mode. In this mode, upload your Arduino file
or connect Rokit Simulator to the board.
Communication Mode
Yellow
This means the BLE board completed its pairing with Inventor
Board.
Pairing Complete
Green
