2
Intended use
Control panel used to operate the unit. There are following items on the panel: Heat-
ing/Air circulation switch (11); Light fixture switch (12); Thermostat adjusting knob
(13); Heater pilot light (14):
Order of operation
• Open the sliding lid and fill unit with popcorn. Close the lid.
• Set the switches (11) and (12) to ON position.
• Adjust the thermostat adjusting knob (13) in the middle position for salted or
seasoned popcorn (about 50°C). For caramel coated popcorn set the knob at
the minimum (fully counter-clockwise).
• To make a serving of popcorn, open the sliding lid and take popcorn as needed.
• Close the sliding lid.
• To turn the unit off, set switches (11) and (12) to OFF position.
VTP popcorn display warmers user manual
6