Robobo RBE-X, Быстрый старт

Страница: 8 / 14

8
Battery charge:
Before using the robotic base for the first time, or if you have not used it for a long
time, the battery should be charged.
To do this, connect the micro USB connector (type B) to the multifunction plug or
charging port of the robotic base (see figure below), and then connect the USB end
(type A) to an USB current adapter (maximum 2A).
To visualize the charge voltage of the battery it is necessary to connect a
Smartphone to the robotic base and follow the instructions shown in
user-guide.theroboboproject.com
If you connect the cable incorrectly, it could cause serious damage to the base.
The warranty does not cover any damage caused by misuse.
After fully charging the robotic base, disconnect it from the power supply. First
disconnect the micro USB cable from the base, and then from the electrical outlet.
Quick start guide
EN