6.
Mounting of optional colour filters.
(not included).
1. Loosen the finger screw and open the lid.
2. Mount the Colour filter.
3. Close the lid again and secure the finger screw.
7.
Trouble shooting
Symptom
Cause
Solution
No light
Is the power ON?
Turn ON the power.
Is the power cord properly
connected?
Reinsert the power cord.
Is the light generator too hot?
Check with the installation
instructions. Cool off for 10
minutes and try again.
No light, but fan is running Is the lamp blown?
Replace lamp with new one.
Light switches ON and OFF
Is the light generator too hot
while operating?
Check with installation
instructions.
Is the fan blocked?
Clear the airways.
Is the fan broken?
Replace the fan with a new
one.
The light output has
diminished
Is the lamp old?
Replace the lamp with a new
one.
Are the filters dirty?
Clean the filters with a damp
cloth. Finish by wiping off
with a dry lint-free cloth.
Is the fibre harness common end
dirty?
Clean the harness common
end with a damp cloth. Finish
by wiping off with a dry lint-
free cloth.
