ROBLIN CUBIX CENTRALE 600, Инструкция по эксплуатации

Страница: 11 / 26

EN
2
4
24
USE
Control Panel
The hood can be switched on pushing directly onto the requested speed without firstly having
to select 0/1 button.
KEY LED FUNCTIONS
L 0/1 Light Turns lighting on and off.
T1 0/1 Motor on First speed.
When pressed for about 2 seconds the motor is switched off.
Flashing 24h Changeover
This is enabled by pressing and holding the button for
approximately 5". It allows a suction level of 100 m3/h
with a noise level of just 28dB(A). Can be enabled at
any speed, even with the hood turned off. To disable,
press and hold the button for approximately 5".
T2 Speed on Second speed.
Flashing Delay (30')
Press the button for approximately 2" to enable auto-
matic shutdown with a 30' delay. Suitable to complete
elimination of any residual smells. Can be enabled at
any speed and is disabled by pressing the button
briefly.
T3 Speed on Third speed.
T4 Speed Fixed Max. speed
Flashing Intensive speed.
Suitable for the strongest cooking vapours and odours.
The function becomes active when the button is pushed
for about 2 seconds. After 10 minutes of functioning it
turns off automatically. This function can be inter-
rupted by means of pressing any of the buttons.
S1 Led Fixed Indicates that the Metal grease filters saturation alarm
has been triggered, and the filters need to be washed.
The alarm is triggered after 100 working hours. (Reset;
check the Maintenance-paragraph)
Flashing indicates that the activated charcoal odour filter satura-
tion alarm has been triggered, and the filter has to be
replaced; the metal grease filters must also be washed.
The activated charcoal odour filter is triggered after
200 working hours. (Activation and Reset; check the
Maintenance-paragraph)