Manual
1S Voltage Booster
Item. Nr.: R01611
Function of Voltage Boosters:
Many receivers and servos need 5-6 volts for correct operation. In some classes (1/12 On Road, Rock Crawler, micro models, ...) with using only one
lithium cell the voltage is not high enough and that can lead to failures, damage to equipment and people.
There is the need for the voltage booster, it provides stable 5.9 volts to the on-board electronics.
Installation:
Carefully follow the instructions of the device since a wrong installation or wrong connection may defect your receiver or the voltage booster.
The cables are designed in red (positive) and black (negative) for easy identification. If reversed (wrong connection) the Voltage Booster will be
destroyed immediately!
1.
Connect the Voltage Booster to the battery connector of your speedcontrol.
2.
Plug the Voltage Booster with the blue JR connector into the battery slot from your receiver.
3.
Check all connections and solder joints and connect the battery to the battery connector.
4.
The red LED indicates the correct function.
Note to cut the power completely after the ride, otherwise the battery will be damaged by undervoltage!
Technical data:
Input voltage: 1S LiPo (2.8-4.2V), 4 Cell NiMH
Maximum input voltage: not more than 5.9V
Output voltage: 5.9V
Power rating: 2.5A
Peak rating: 5A
Dimensions (without cable): 28x14x6mm (LxWxH)
Weight without cable: 2.8g
Weight with cable: 9.0g
Automatic shutdown at 2.8V
Highly flexible silicon cable at the input and output
Red indicator LED
Warranty:
With the purchase of this product you purchased a two-year warranty
from date of purchase. This covers material and / or processing damage
that existed at the time of delivery.
Excluded from the warranty are:
• Damage caused by normal wear and tear.
• Damages caused by misuse.
• Damage caused by neglect of duty of care and improper treatment.
For warranty claims please contact your dealer.
If you send the product yourself direct, please attach a copy of the
invoice and necessarily a repairsheet. You can download it at
www.robitronic.com.
Robitronic assumes no liability for damages and losses, directly or
indirectly caused by the use or misuse of this product and its required
accessories and chemicals necessary for operation.
Technical changes as well as changes in configuration or design are
reserved.
Robitronic Electronic GmbH, Brunhildengasse 1/1, A-1150 Vienna, Austria; Tel.:+43 (0)1-982 09 20, Fax: +43 (0)1-98 209 21
www.robitronic.com
