3
PARTITIONS
Partitions may be fitted at any glazing bar position in the greenhouse. It is advisable to
complete
the partition including
glazing before the rest of the structure to make its fitting more straight forward as you will have more space to work.
Unlike the main building where you construct the gables whole and attach them it is better with a partition to build it in
situ, i.e. build up the partition around the adjoining frame utilising the specially slotted side and roof corner bars. The slot
allows the ridge, gutter and base rail to pass through. Make sure that you orientate the bars the correct way around to
match the front of your building. If however the partition is required on a joint between a main building and extension
module, the reinforcing A-frame normally fitted between two building sections is no longer used. It is imperative in this
situation that the partition faces the main building checking that you have maintained the 620mm hole spacing's required
for the glass to successfully fit. (See diagram).
MAIN MODULE
EXTENSION
DOOR / S
DOOR / S
FRO
N
T
REAR
PARTITION
Feed glazing rubber into each glazing bar and
trim to length. Notice that some channels are
only used on a partition. Applying a lubricant to
the aluminium channels will speed up insertion.
PARTITION
ONLY
PARTITION
ONLY
Содержание Partition
Страница 1: ......
