3
Installation
Preparation
Ensure that the rangehood is not connected to the power supply until after installation is complete.
If you have an outlet leading outside, you can connect your rangehood, according to the image below, by means of
an extraction duct (enamel, aluminium, flexible pipe or inflammable material) with an interior diameter of 150mm.
The rangehood must be placed at least
65cm
above the cooking surface. For best effect, do not install the
rangehood more than
75cm
above the cooking surface.
Wall Mounting
•
Drill three 8mm holes to mount the bracket. Screw and tighten the bracket to the wall using the screws and
screw plugs supplied.
•
Lift the range hood and hang it on the wall bracket.
