8
Product approvals and ratings
Product rating
Appliance: 272W 220-240V ~50Hz
LED: 1x7W
Electric approval AS/NZS
60335.2.31:2013
EMC AS/NZS
CISPR 14.1:2010
Performance tested
IEC61591
Important safety information
All electrical work must be done by a registered electrician in accordance with local and national
electrical codes as applicable. For your safety, this product must be earthed.
If the supply cord of this equipment is damaged, it must only be replaced by the manufacturer or its
service agent or a similarly qualified person in order to avoid a hazard.
This rangehood is designed for indoor use only and must be in a dry location.
Disconnect the power supply when changing light bulbs.
This appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person responsible for their safety.
Young children should be supervised to ensure that they do not play with the appliance.
There shall be adequate ventilation of the room when the rangehood is used at the same time as
appliances burning gas or other fuels.
There is a fire risk if cleaning is not carried out in accordance with the instructions.
You must read
the details concerning the method and frequency of cleaning.
Do not flambé under the rangehood.
Exhaust air must not be discharged into an existing flue which is used for exhausting fumes from
appliances burning gas or other fuels.
The minimum distance between the hob surface and the lowest part of the rangehood is 650mm. If
the instructions for the hob specify a greater distance, this has to be taken into account.
Attention should be given to ensure that any applicable regulations concerning the discharge of
exhaust air is fulfilled. If recirculating, take care no ventilation becomes blocked or partially blocked.
Caution: Accessible parts may become hot when used with cooking appliances.
WARING: Failure to install the screws or fixing devices in accordance with these instructions may
result in an electrical hazard.
You must read and follow the details concerning the method and frequency of cleaning.
Notes:
o
Please remember to fill out the details on the warranty certificate (do not post).
o
Remove any plastic coating from the product.
o
Ensure all screws are fitted tightened.
