3
Pre-Installation
Ducting
The method of ducting should be carefully considered before installing the rangehood. 150mm round ducting should be
used in conjunction with this model rangehood. Alternatively, this rangehood can be operated in recirculation mode.
Installation position
A.
Minimum
height from the hob surface to the underside face of the rangehood:
650mm
.
Note
: If the instructions for the hob specify a greater distance, this greater distance must be used. Any installation
above
750mm
will compromise performance.
B.
Vertical height from bottom of Rangehood to Fixing Plate mounting screws
323mm
.
C.
Distance between mounting screw holes on Fixing Plate
100mm.
