RR Series - ROYALE
APPROVED Page 5 of 8
ISSUE: F
ECN 3106
'Robinhood' Retractable Rangehood
WARNING: DISCONNECT POWER SUPPLY BEFORE SERVICING.
A) TO REPLACE MOTOR:
1
PULL CANOPY OPEN. REMOVE FILTERS AND WORKING FROM
UNDERSIDE UNFASTEN 3 ‘a’ SCREWS. SEE DIAGRAM BELOW.
2
UNFASTEN 5 SCREWS TO REMOVE THE FAN BOX FRONT
COVER FROM THE FAN BOX.
3
UNFASTEN 2 ‘b’ SCREWS/NUTS TO REMOVE THE MOTOR
ASSEMBLY.
4
CUT CABLE TIES AND DISCONNECT WIRES ATTACHED TO THE
TERMINAL BLOCK ON TOP OF THE MOTOR MOUNTING
BRACKET.
5
REMOVE MOTOR ASSEMBLY FROM RANGEHOOD THROUGH
FAN BOX FRONT OPENING.
6
REMOVE AND REPLACE MOTOR AND CAPACITOR FROM THE
MOTOR MOUNTING BRACKET.
7
REFER TO THE WIRING DIAGRAM FOR WIRING DETAILS.
8
RE-ASSEMBLE RANGEHOOD IN REVERSE TO PROCEDURE
ABOVE, USING CABLE TIES ON WIRES TO ENSURE THEY WILL
NOT COME INTO CONTACT WITH THE MOTOR.
UNDERSIDE VIEW OF RANGEHOOD
