2
Installation Instructions
PACKING AND MOVING
1-
Please memorize the position of each accessory of the appliance when unpack it, repack the product
and check carefully before transportation.
2-
Do not lift or pull the door and the door handle during transportation.
3-
When moving, the appliance cannot be titled over 45 degrees (the angle to the vertical direction).
Please avoid strong vibration and collision.
INSTALLATION
1.
The refrigerator should be located in a completely flat surface, leave approximately 50mm between each
side of the appliance and the wall, leave approximately 300 mm between the top of the appliance and the
ceiling.
2.
Choose a location which is not exposed to sunlight, High temperature or humid , as humidity may cause
stain.
3.
Pull out the bottom panel before installation.
4.
The appliance can be adjusted by switching its two legs in the front of the bottom panel when it is unstable.
Rotating them in the clockwise and anti-clockwise direction can rise up or down the appliance.
5.
The location should be firm and flat. An un-securely position may cause noise and liberation:
•
the noise may be increased if the floor is not firm.
•
put a sheet under the appliance to solve the heat emission if you need to locate it onto a carpet.
6.
Make sure the adjustable legs are clung to the floor and set the appliance slope backward slightly to keep
the doors closed tightly.
