5
Installation Instructions Continued
2.
Fix the wall hanging brackets (2 supplied) to the wall securely (eg. into the stud.) Fit a timber slat between
the studs to mount the brackets onto if the stud position is too wide.
3.
To install the hanging hook to timber. Please see Fig 2.
4.
Align hanging hooks and fasten screws tightly.
5.
Adjust the exhaust connector direction, then, match the exhaust
connector onto the connector. Please see Fig 3.
6.
Turn the exhaust connector clockwise, until it insert into the
connector's groove.
7.
Use 4 x 12mm screws (provided) to fix the 2 spacers as per Fig 4.
8.
With assistance, mount dryer onto the wall bracket. See Fig 5.
