Robin Robin 800, Руководство пользователя, Страница: 25 / 41

5
the same time to the end point of their tracks (pan and tilt use their optimal speeds).
Time of the pan/tilt movement (25.5 sec. max.) is set by the channel "Pan/Tilt speed, Pan/Tilt
time".
Speed Mode
- Both Pan and tilt will move with the same speed as adjusted at the channel
"Pan/Tilt speed, Pan/Tilt time".
Tilt Movement Range
- Use this menu to set the range of the tilt movement of the fixture´s head
Stand.
– Standard range 0-300°.
Reduc.
- Reduced range 0-210°. This option must be selected when the top hat is installed
otherwise fixture´s head rans into base.
Microphone Sensitivity - Enter the menu if you want to adjust the microphone sensitivity from 1 (max.) to 20
(min.).
Blackout Settings - Use the menu if you need to close the light output under certain conditions which are
described below
Blackout DMC - Blackout during movement correction. Set this option On if you wish to close light
output during the time when the head goes to its correct position, which has been changed by an
external force.
Active Blackouts
- Use this menu if you wish to close the light output during effect changes.
Pan/Tilt Moving
- The menu item enables to close light output while the pan/tilt coordinates
are changing.
Zoom mode
- Use this menu to change min. beam angle.
Beam Zoom
- Beam angle 8°-53° (half beam)
Wash Zoom - Beam angle 15°-53° (half beam), compatible zoom range with the Robin LEDWash 300/600.
These zoom options are also stated in DMX chart (channel Power/Special functions).
Init Effect Positions - Use the menu to set all effects to the desired positions at which they will stay after
switching the fixture on without DMX signal connected.
Screen Settings - Use this menu to change the touch screen settings.
Display Intensity - The item allows to control the intensity of the screen (1-min., 10-max.).
Screen saver Delay
- The item allows you to keep the screen on or to turn it off automatically after 1-10
minutes after last touch (or pressing any button on the control panel).
Touchscreen Lock
- The item allows you to lock the screen after last touch (or pressing any button on the
control panel). The time delay can be set in range of 1-10 minutes.To unlock the screen, press the
[ENTER/Display On] button.
Recalibrate Touchscreen
- The item starts calibration of the touchscreen. Follow the instructions on
the screen.
Display Orientation - The menu allows to change display orientation.
Normal - Standard display orientation if the fixture is placed horizontally (e.g. on the ground).
Inverted - Inverted orientation (needed if the fixture is hanging on the truss).
Auto - The option activates a gravitation sensor for automatic screen orientation.
Note:
Auto
option is set as default. You change the display orientation by touching the icon on the display,
an the option set in the "Display Orientation" menu is temporarily overriden.
Temperature unit
- Use the menu item to change temperature unit from °C to °F.
Fan Mode - Use the menu to set the fixture fans to max. fan power mode (" High ") or to auto- control mode
(" Auto ")..The third mode (" Silent ") allows to set desired noise of the fixture fans and the adjusted noise level
is kept during fixture operation. The " Fan Noise Leve l" menu serves for adjusting fans power from min. to
max.
To switch the fixture to the "Silent" mode can be also realized by DMX value from range of 241-255 on the
"power/Special functions channel".
Note: the light output near min. level of the fan noise is reduced.
Theatre mode
- The mode reduces max. pan/tilt and zoom speed in order to provide silent operation of the
fixture:
Pan range 0-450°: 3.4 seconds at max. speed.
Tilt range 0-300°: 2.5 seconds at max. speed.
Zoom min-max: 10 seconds at max speed
Date & Time Settings
- Use this menu to set current date and time for the fixture log system (menu "
View