7
26. After adjusting of 5600K colour temperature, touch
on fixture display to save adjusted values and
reset the fixture.
Calibration protocol:
Effect
Mode 1
Mode 2
Mode 3
Pan
channel 4
channel 39
channel 37
Tilt
channel 49
channel 40
channel 3
Ef. wheel
channel 50
channel 4
channel 39
Rot. Gobo Wheel
channel 5
channel 4
channel 40
Rot. Gobo Index.
channel 52
channel 43
channel 41
Prism
channel 53
channel 44
channel 4
Iris
channel 54
channel 45
channel 43
Zoom
channel 55
channel 46
channel 44
Focus
channel 56
channel 47
channel 45
Fr. Shutters rot.
channel 57
channel 48
channel 46
Fr. Shutter 1 mov.
channel 58
channel 49
channel 47
Fr. Shutter 1 swiv.
channel 59
channel 50
channel 48
Fr. Shutter 2 mov.
channel 60
channel 51
channel 49
Fr. Shutter 2 swiv.
channel 61
channel 52
channel 50
Fr. Shutter 3 mov.
channel 62
channel 53
channel 51
Fr. Shutter 3 swiv.
channel 63
channel 54
channel 52
Fr. Shutter 4 mov.
channel 64
channel 55
channel 53
Fr. Shutter 4 swiv.
channel 65
channel 56
channel 54
Red
channel 66
channel 57
channel 55
Green
channel 67
channel 5
channel 56
Blue
channel 68
channel 59
channel 57
White
channel 69
channel 60
channel 5
Calibrate Driver
- The function runs recalibration of the LED driver. It is suitable use this function when some
non-uniform colour changes appear during colour saturation or if software upgrade is executed.
Load Default Calibrations
- The item loads default (factory) calibration values.
Updating software
-
The menu item allows you to update software in the fixture via either serial or USB port
of PC.
The following are required in order to update software:
- PC running Windows 95/98/2000/XP or Linux
- DMX Software Uploader
- Flash cable RS232/DMX No.13050624 (if you want to use a serial port of PC)
- Robe Universal Interface (if you want to use an USB port of PC)
Note 1: Software update should execute a qualified person. If you lack qualification, do not attempt the updatey
-
ourself and ask for help your ROBE distributor.
Note 2: DMX address, IP address, programs 1-3 and all items in the menu "Personality" will be set to their
default (factory) values.
To update software in the fixture:
I. Installation of the DMX Software Uploader.
1. DMX Software Uploader program is available from the ROBE web site at WWW.robe.cz.
2. Make a new directory ( e.g. Robe_Uploader) on your hard disk and download the software to it.
3. Unpack the program from the archive. If the Robe fixture is produced in both magnetic
and electronic ballast version, name of DMX Software Uploader is the same for both versions.
II.Fixture software updating.
1.Determine which of your ports is available on your PC and connect it:
- with the DMX input of the fixture if you using the flash cable RS232/DMX
- with the DMX output of the Robe Universal Interface if you using the USB cable.
Disconnect the fixture from the other fixtures in a DMX chain. Turn both the computer and
the fixture on. Make sure the lamp is switched off (only if the fixture involves a lamp).
2. Switch the fixture to the updating mode by touching the "Updating Software " item
Note: If you do not want to continue in software update, you have to switch off and on the fixture
to escape from this menu.
We recommend to cancel all running programs before starting the Software Uploader.
3. Run the Software Uploader program. Select desired COM and then click on the Connect button.
Содержание DLS
Страница 1: ... Version1 2 ...
Страница 14: ...14 Framing shutters identification ...
Страница 33: ...33 12 Photometric diagrams Specifications are subject to change without notice October 8 2014 ...
Страница 34: ...34 ...