manualshive.com logo in svg

Robin Cyclone Wireless DMX CRMX, Руководство пользователя, Страница: 41 / 44

Поделиться
Скачать
Robin Cyclone Wireless DMX CRMX Скачать руководство пользователя страница 41

4

11. Maintenance and cleaning

It is absolutely essential that the fixture is kept clean and that dust, dirt and smoke-fluid residues must not build 

up on the fixture. Otherwise, the fixture‘s light-output will be significantly reduced. Regular cleaning will not only 

ensure the maximum light-output, but will also allow the fixture to function reliably throughout its life. 

A soft lint-free cloth moistened with any good glass cleaning fluid is recommended, under no circumstances 

should solvents be used!

DANGER !

Disconnect from the mains before starting any

maintenance work

The air filter in the fixture base requires frequent cleaning as smoke-fluid tends to building up residues,

 reducing the air flow trough the filter (and the fixture base) very quickly. The cover of the filter is fasten by 

means of magnets. Bend this cover out to reach the air filter

.

After replacing the air filter, reset the elapsed time counter in the menu "Information" (Information--->Air Filters-

--> Elapsed Time).

If the fixture has been used in a smoke, fog, haze or similar environment, the fixture 

surface has to be cleaned before inserting into flight case!

Do not dismantle the fixture except air filters replacing as the weather sealing of the fixture housing 

could be demaged! 

More complicated maintenance and service operations are only to be carried out by authorized dis

-

tributors.

11.1 Replacing fuse

IOnly replace the fuse by a fuse of the same type and rating.

Before replacing the fuse, unplug mains lead!

 

 1) Remove the fuse holder on the rear panel of the base with a fitting screwdriver from the housing

 

     (anti-clockwise).

 

 2) Remove the old fuse from the fuse holder.

 

 3) Install the new fuse in the fuse holder (only the same type and rating).

 

 4) Replace the fuse holder in the housing and fix it.

12. ChangeLog 

This section summarizes all types of changes in the user manual.

Version of the 

manual

Date of issue

Description of changes

.3

05/0/04

Added item Air Filters in the menu Information 

.

/0/04

Added chapter " Operating the Robin Cyclone with smoke machines"

.

30/09/03

New DMX chart vers. 1.1. 

Specifications are subject to change without notice.

June 16, 2014

Содержание Cyclone Wireless DMX CRMX













































Отзывы:

Нет отзывов